Installing the UPS System
Preliminary Installation Information
2.1
Installation should be performed only by qualified personnel.
Refer to the following while installing the UPS system:
•
Refer to Appendix A of this manual for installation drawings and additional
installation notes.
•
Dimensions in this manual are in millimeters and inches.
•
Do not tilt the cabinets more than
•
The conduit landing plates are to be removed to add conduit landing holes as
required. Plate material is 16 gauge steel (0.060 in. thick).
•
The cabinets must be installed on a level floor suitable for computer or
electronic equipment.
•
If perforated floor tiles are required for ventilation, place them in front of the
UPS. Refer to Table J in Appendix A for equipment weight and point loading.
•
Details about control wiring are provided in each procedure for connecting
options and features. Drawing 164201491---2 and Tables G and H in
Appendix A identify the control wiring terminations.
Powerware 9330 (IBM 9910 20 kVA) Installation and Operation
164201491 REV. B 013004
WARNING:
10˚ during installation.
2
2--1