Reboot; Discovery-Bonjour - Cisco WAP121 Administration Manual

Administration

Reboot

Reboot
STEP 1
STEP 2
STEP 3
Discovery—Bonjour
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
You can use the Reboot page reboot the WAP.
To reboot the WAP, click Administration > Reboot in the navigation window.
Select one of these options:
• Reboot—Reboots the WAP using Startup Configuration.
• Reboot to Factory Default—Reboots the WAP using the factory default
configuration file. Any customized settings are lost.
A window appears to enable you to confirm or cancel the reboot. The current
management session might be terminated.
Click OK to reboot.
Bonjour enables the WAP and its services to be discovered by using multicast
DNS (mDNS). Bonjour advertises services to the network and answers queries for
service types it supports, simplifying network configuration in small business
environments.
The WAP advertises these service types:
• Cisco-specific device description (csco-sb)—This service enables clients
to discover Cisco WAP and other products deployed in small business
networks.
• Management user interfaces—This service identifies the management
interfaces available on the WAP (HTTP, Telnet, SSH, and SNMP).
When a Bonjour-enabled WAP device is attached to a network, any Bonjour client
can discover and get access to the management interface without prior
configuration.
A system administrator can use an installed Internet Explorer plug-in to discover
the WAP device. The web-based configuration utility shows up as a tab in the
browser.
Bonjour works in both IPv4 and IPv6 networks.
3
47