Reboot; Schedule Reboot - Cisco WAP125 Administrator's Manual

Reboot

Reboot
Use the Reboot page to reboot the WAP device or reset the WAP device to its factory defaults. To reboot or
reset the WAP device do the following:
Step 1
Select Administration > Reboot.
Step 2 To reboot the WAP device using the factory default configuration file, check Restore to Factory Default Settings. Any
customized settings are lost.
Step 3
Click Reboot. A window is appears prompting you to confirm or cancel the reboot.
Step 4 Click OK to reboot.

Schedule Reboot

To schedule a reboot on the WAP device, follow these steps:
Step 1 Check the Schedule Reboot check box to enable the schedule reboot function.
Step 2 There are two options to schedule a reboot.
• Date — Set the exact date and time when to reboot the device.
• In — Set the reboot time for the reboot to occur after the function is enabled.
Note For In, the reboot scheduler is still effective after the device
reboots.
Step 3 Click Save.
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
98
Administration