Reboot - Cisco WAP571 Administration Manual

Administration

Reboot

STEP 3
STEP 4
Reboot
STEP 1
STEP 2
STEP 3
Cisco WAP571/E Administration Guide
• Mirror Configuration—If the Startup Configuration is not modified for at
least 24 hours, it is automatically saved to a Mirror Configuration file. The
Mirror Configuration file is a snapshot of a past Startup Configuration. The
Mirror Configuration is preserved across factory resets, so it can be used to
recover a system configuration after a factory reset by copying the Mirror
Configuration to the Startup Configuration.
For the Destination File Name, select the file type to be replaced with the file you
are copying.
Click Save to begin the copy process.
When complete, a window shows the message, Copy Operation Successful.
You can use the Reboot page reboot the AP.
To reboot the WAP, select Administration > Reboot in the navigation pane.
Select one of these options:
• Reboot—Reboots the WAP using Startup Configuration.
• Reboot to Factory Default—Reboots the WAP using the factory default
configuration file. Any customized settings are lost.
A window appears to enable you to confirm or cancel the reboot. The current
management session might be terminated.
Click OK to reboot.
3
53