Email Alert - Cisco WAP121 Administration Manual

Administration

Email Alert

STEP 3
NOTE
Email Alert
STEP 1
STEP 2
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
Using the default port is recommended. However; If you choose to
reconfigure the log port, make sure that the port number you assign to
syslog is available for use.
Click Save. The changes are saved to the Running Configuration and to the Startup
Configuration.
If you enabled a Remote Log host, clicking Save activates remote logging. The
WAP device sends its kernel messages real-time for display to the remote log
server monitor, a specified kernel log file, or other storage, depending on your
configurations.
If you disabled a Remote Log host, clicking Save disables remote logging.
After new settings are saved, the corresponding processes may be stopped and
restarted. When this happens, the WAP device may lose connectivity. We
recommend that you change WAP device settings when it will least affect your
wireless clients.
Use the email alert feature to send messages to the configured email addresses
when particular system events occur.
The feature supports mail server configuration, message severity configuration,
and up to three email address configurations to send urgent and non-urgent email
alerts.
To configure the WAP to send email alerts:
Click Administration > Email Alert in the navigation window.
In the Global Configuration area, configure these parameters:
• Admin Mode—Enables the email alert feature globally.
• From Email Address—Email alert From Address configuration. The address
is a 255 character string with only printable characters. The default is null.
• Log Duration—Configures how frequently a scheduled message is sent.
The range is from 30 to 1440 minutes. The default is 30 minutes.
3
35