Upload Binary Files - Cisco WAP121 Administration Manual

Captive Portal

Upload Binary Files

Upload Binary Files
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
When users initiate access to a VAP that is associated to a captive portal instance,
an authentication page displays. You can customize this page with your own logo
and other graphics. You can use the Upload Binary Files page to upload these
graphics to the WAP device.
Up to 18 images can be uploaded (assuming six locales and each locale can have
three images).
To upload binary graphic files to the WAP device:
Create or identify custom graphics to replace the default graphics, as shown in
this table:
Image Type Use
Logo Displays at top left of page to provide
branding information.
Account Displays above the login field to depict
an authenticated login.
Background Displays in the page background.
Images will be resized to fit the specified dimensions. For best results, the logo
and account images should be similar in proportion to the default images.
All images must be 5 kilobytes or smaller and must be in GIF or JPG format.
Click Captive Portal > Upload Binary Files in the navigation window.
Click Browse next to Upload Web Customization Image to select the file from
your computer or network.
Click Upload.
Go to the Web Customization page to apply an uploaded graphic to a CP web
page.
NOTE: To delete an image, select it from the Delete Web Customization Image
list and click Delete.
9
Default Width x
Height
168 × 78 pixels
295 × 55 pixels
10 × 800 pixels
145