Http Upgrade - Cisco WAP121 Administration Manual

Administration
Firmware Upgrade
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
Uploading the new software may take several minutes. Do not refresh the page or
navigate to another page while uploading the new software, or the software
upload will be aborted. When the process is complete the access point will restart
and resume normal operation.
To verify that the firmware upgrade completed successfully, log into the user
interface and display the Upgrade Firmware page and view the active firmware
version.

HTTP Upgrade

To upgrade using HTTP:
Select HTTP for Transfer Method.
If you know the name and path to the new file, enter it in the Source File Name
field. Otherwise, click the Browse button and locate the firmware image file on
your network.
The firmware upgrade file supplied must be a
files or files of other formats for the upgrade; these types of files will not work.
Click Upgrade to apply the new firmware image.
Uploading the new software may take several minutes. Do not refresh the page or
navigate to another page while uploading the new software, or the software
upload will be aborted. When the process is complete the access point will restart
and resume normal operation.
To verify that the firmware upgrade completed successfully, log into the user
interface and display the Upgrade Firmware page and view the active firmware
version.
tar file. Do not attempt to use
3
bin
42