Cisco WAP121 Administration Manual page 57

LAN Settings
LAN Settings
STEP 3
STEP 4
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
This VLAN is also the default untagged VLAN. If you already have a
management VLAN configured on your network with a different VLAN ID, you
must change the VLAN ID of the management VLAN on the WAP device.
Configure these IPv4 settings:
• Connection Type—By default, the DHCP client on the WAP121/WAP321
automatically broadcasts requests for network information. If you want to
use a static IP address, you must disable the DHCP client and manually
configure the IP address and other network information.
Select one of these values from the list:
- DHCP—The WAP device will acquire its IP address from a DHCP server
on the LAN.
- Static IP—You will manually configure the IPv4 address. The IPv4
address should be in a form similar to xxx.xxx.xxx.xxx (192.0.2. 1 0).
• Static IP Address, Subnet Mask, and Default Gateway—If you elected to
assign a static IP address, enter the IP information.
• Domain Name Servers—Select an option from the list:
- Dynamic—The WAP device will acquire DNS server addresses from a
DHCP server on the LAN.
- Manual—You will manually configure one or more DNS server
addresses. Enter up to two IP addresses in the text boxes provided.
Configure these IPv6 settings:
• IPv6 Connection Type—Configures how the WAP device obtains an IPv6
address:
- DHCPv6—The IPv6 address will be assigned by a DHCPv6 server.
- Static IPv6—You will manually configure the IPv6 address. The IPv6
address should be in a form similar to
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (2001:DB8::CAD5:7D91).
• IPv6 Administration Mode—Enables IPv6 management access.
• IPv6 Auto Configuration Administration Mode—Enables IPv6 automatic
address configuration on the WAP device.
When enabled, the WAP device learns its IPv6 addresses and gateway by
processing the Router Advertisements received on the LAN port. The WAP
device can have multiple autoconfigured IPv6 addresses.
4
57