Cisco WAP121 Administration Manual page 143

Captive Portal
Instance Configuration
STEP 6
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
If you enable RADIUS accounting, it is enabled for the primary RADIUS
server and all backup servers, and for globally or locally configured servers.
RADIUS IP—The IPv4 or IPv6 address for the primary RADIUS server for this
VAP. The IPv4 address should be in a form similar to xxx.xxx.xxx.xxx
(192.0.2. 1 0). The IPv6 address should be in a form similar to
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (2001:DB8::CAD5:7D91).
When the first wireless client tries to authenticate with a VAP, the WAP
device sends an authentication request to the primary server. If the primary
server responds to the authentication request, the WAP device continues to
use this RADIUS server as the primary server, and authentication requests
are sent to the address you specify.
• Radius Backup IP 1–3—Up to three IPv4 or IPv6 backup RADIUS server
addresses.
If authentication fails with the primary server, each configured backup server
is tried in sequence.
• RADIUS Current—Enables selecting administratively the active RADIUS
server, rather than having the WAP device attempt to contact each
configured server in sequence and choose the first server that is up.
• RADIUS Key—The shared secret key that the WAP device uses to
authenticate to the primary RADIUS server.
You can use up to 63 standard alphanumeric and special characters. The key
is case sensitive and must match the key configured on the RADIUS server.
The text you enter will be displayed as "*" characters.
• RADIUS Backup Key 1–3—The RADIUS key associated with the
configured backup RADIUS servers. The server at RADIUS IP Address-1
uses RADIUS Key-1, RADIUS IP Address-2 uses RADIUS Key-2, and so on.
• Locale Count—The number of locales associated with the instance. You can
create and assign up to three different locales to each CP instance from the
Web Customization page.
• Delete Instance—Deletes the current instance.
Click Save. You changes are saved to the Running Configuration.
9
143