Cisco WAP121 Administration Manual page 66

Wireless Settings
Radio
STEP 5
!
CAUTION
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
• TSPEC Voice ACM Limit —The upper limit on the amount of traffic the WAP
device attempts to transmit on the wireless medium using a voice AC to gain
access.
• TSPEC Video ACM Mode —Regulates mandatory admission control for the
video access category. The options are:
- On — A station is required to send a TSPEC request for bandwidth to the
WAP device before sending or receiving a video traffic stream. The WAP
device responds with the result of the request, which includes the
allotted medium time if the TSPEC was admitted.
- Off — A station can send and receive video priority traffic without
requiring an admitted TSPEC; the WAP device ignores video TSPEC
requests from client stations.
• TSPEC Video ACM Limit —The upper limit on the amount of traffic that the
WAP device attempts to transmit on the wireless medium using a video AC
to gain access.
• TSPEC AP Inactivity Timeout —The amount of time for a WAP device to
detect an downlink TS as idle before deleting it. The valid integer range is
from 0 to 120 seconds.
• TSPEC Station Inactivity Timeout —The amount of time for a WAP device
to detect an uplink TS as idle before deleting it. The valid integer range is
from 0 to 120 seconds.
• TSPEC Legacy WMM Queue Map Mode —Enables or disables the
intermixing of legacy traffic on queues operating as ACM.
Click Save. The changes are saved to the Running Configuration and to the Startup
Configuration.
After new settings are saved, the corresponding processes may be stopped and
restarted. When this happens, the WAP device may lose connectivity. We
recommend that you change WAP device settings when it will least affect your
wireless clients.
5
66