Cisco WAP121 Administration Manual page 87

Wireless Settings
MAC Filtering
STEP 3
STEP 4
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
NOTE: The filter setting also applies to the MAC filtering list stored on the
RADIUS server, if one exists.
In the MAC Address field, enter the MAC address to allow or block and click Add.
The MAC Address appears in the Stations List.
Continue entering MAC addresses until the list is complete, and then click Save.
The changes are saved to the Running Configuration and to the Startup
Configuration.
NOTE: To remove a MAC Address from the Stations List, select it, then click
Remove.
NOTE: After new settings are saved, the corresponding processes may be
stopped and restarted. When this happens, the WAP device may lose
connectivity. We recommend that you change WAP device settings when it will
least affect your wireless clients.
5
87