Cisco WAP121 Administration Manual page 73

Wireless Settings
Networks
STEP 4
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
We recommend using WPA Personal or WPA Enterprise as your
NOTE
device's authentication type as it provides the stronger security protection.
Use Static WEP or Dynamic WEP only for legacy wireless computers or
devices that do not support WPA Personal/Enterprise. If you need to set
security as Static WEP or Dynamic WEP, configure Radio as 802. 1 1a or
802. 1 1b/g mode (see
of Static or Dynamic WEP as your device's security mode.
• MAC Filtering—Whether the stations that can access this VAP are restricted
to a configured global list of MAC addresses. You can select one of these
types of MAC filtering:
- Disabled: Do not use MAC filtering.
- Local: Use the MAC Authentication list that you configure on the MAC
Filtering page.
- RADIUS: Use the MAC Authentication list on an external RADIUS server.
• Channel Isolation—Enables and disables station isolation.
- When disabled, wireless clients can communicate with one another
normally by sending traffic through the WAP device.
- When enabled, the WAP device blocks communication between
wireless clients on the same VAP. The WAP device still allows data traffic
between its wireless clients and wired devices on the network, across a
WDS link, and with other wireless clients associated with a different VAP,
but not among wireless clients.
• HTTP Redirect—Enables or disables the redirecting of wireless clients to a
custom Web page.
When redirect mode is enabled, the user will be redirected to the URL you
specify after the wireless client associates with a WAP device and the user
opens a Web browser on the client to access the Internet.
The custom Web page must be located on an external Web server and might
contain information such as the company logo and network usage policy.
NOTE: The wireless client is redirected to the external Web server only once
while it is associated with the WAP device.
• Redirect URL—The URL where the Web browser is to be redirected after
the wireless client associates with the WAP device and sends HTTP traffic.
Click Save. The changes are saved to the Running Configuration and to the Startup
Configuration.
Radio, page 60). The 802. 1 1n mode restricts the use
5
73