Cisco WAP121 Administration Manual page 125

Client Quality of Service
Policy Map
STEP 3
STEP 4
STEP 5
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
The page redisplays with additional fields for configuring the policy map.
In the Policy Class Definition area, ensure the newly created policy map displays in
the Policy Map Name list.
In the Class Map Name list, select the class map to apply this policy.
Configure the parameters:
• Police Simple—Establishes the traffic policing style for the class. The
simple form of the policing style uses a single data rate and burst size,
resulting in two outcomes: conform and nonconform. If you select this field,
configure one of these fields:
- Committed Rate—The committed rate, in Kbps, to which traffic must
conform. The range is from 1 to 4294967295 Kbps.
- Committed Burst—The committed burst size, in bytes, to which traffic
must conform. The range is from 1 to 64000 bytes.
• Send—Specifies that all packets for the associated traffic stream are to be
forwarded if the class map criteria is met.
• Drop—Specifies that all packets for the associated traffic stream are to be
dropped if the class map criteria is met.
• Mark Class of Service—Marks all packets for the associated traffic stream
with the specified class of service value in the priority field of the 802. 1 p
header. If the packet does not already contain this header, one is inserted.
The CoS value is an integer from 0 to 7.
• Mark IP DSCP—Marks all packets for the associated traffic stream with the
IP DSCP value you select from the list or specify.
- Select from List—A list of DSCP types.
- Match to Value—A DSCP value that you specify. The value is an integer
between 0 to 63.
• Mark IP Precedence—Marks all packets for the associated traffic stream
with the specified IP precedence value. The IP precedence value is an
integer from 0 to 7.
• Disassociate Class Map—Removes the class selected in the Class Map
Name list from the policy selected in the Policy Map Name list.
• Member Classes—Lists all DiffServ classes currently defined as members
of the selected policy. If no class is associated with the policy, the field is
empty.
7
125