Expansion Board Ejector/Divider - HP DL380 Generation 4 Maintenance And Service Manual

Generation 4 server
Table of Contents

Advertisement

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots
have either an expansion slot cover or an expansion board installed.
Remove the expansion slot cover.
5.
To replace the component, reverse the removal procedure.

Expansion board ejector/divider

NOTE: This component is available only with the optional, hot-plug PCI riser cage.
To remove the component:
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
Remove the PCI riser cage.
4.
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser cage.
("Extend the server from the
rack" on page 20).
("Access
panel" on page 22).
rack" on page 19,
Removal and replacement procedures 33
"Remove

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant dl380 g4

Table of Contents