DVD/CD-ROM drive ejector assembly
To remove the component:
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
Remove the DVD/CD-ROM drive, if installed
4.
Remove the diskette drive
5.
Remove the ejector lever.
6.
Press and hold the ejector button.
7.
Remove the ejector assembly.
8.
To replace the component, reverse the removal procedure.
("Extend the server from the
rack" on page 20).
("Access
panel" on page 22).
("Diskette drive
option" on page 24).
("DVD/CD-ROM
drive" on page 22).
Removal and replacement procedures 23
rack" on page 19,
"Remove