HP DL380 Generation 4 Maintenance And Service Manual page 84

The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM may
report server status differently than the health LEDs because the software tracks more system attributes.
System LED and color
Processor failure,
socket X (amber)
PPM failure, slot X
(amber)
DIMM failure, slot X
(amber)
DIMM failure, all slots
in one bank (amber)
Overtemperature
(amber)
Riser interlock (amber)
Online spare memory
(amber)
Power converter
module (amber)
Fan (amber)
SCSI configuration
error (amber)*
*This feature applies only to SCSI models.
Internal health LED Status
color
Red One or more of the following conditions may exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the socket.
•
Processor X is unsupported.
•
ROM detects a failed processor during POST.
Amber Processor in socket X is in a pre-failure condition.
•
Red PPM in slot X has failed.
•
PPM is not installed in slot X, but the corresponding
processor is installed.
•
Red DIMM in slot X has failed.
•
Amber DIMM in slot X is in a pre-failure condition.
Red No valid or usable memory is installed in the system.
•
Red The Health Driver has detected a cautionary
temperature level.
•
The server has detected a hardware critical
temperature level.
Red PCI riser cage is not seated.
Amber Bank X failed over to the online spare memory bank.
Red Power converter module has failed.
Amber Redundant fan has failed.
Red The minimum fan requirements are not being met. One or
more fans have failed or are missing.
Red SCSI cabling or terminator configuration is incorrect for
SCSI backplane.
Component identification 84