External Storage Cabling - HP DL380 Generation 4 Maintenance And Service Manual

External storage cabling

The external VHDCI SCSI connector (port 1) can only be used in the following SCSI configurations:
•
Embedded simplex
•
PCI simplex
•
PCI duplex
•
Mixed duplex (one of two configuration options)
For more information, refer to "Mixed duplex SCSI cabling
61)".
After cabling external storage options, use the following software utilities:
•
RBSU, to configure new hardware in the system
For more information, refer to "HP ROM-Based Setup Utility (on page 72)" or the ROM-Based Setup
Utility User Guide on the Documentation CD.
•
ORCA, to configure and manage drive arrays
For more information, refer to the Smart Array 6i Controller User Guide on the Documentation CD.
For more information on external cabling, refer to the HP website
(http://www.hp.com/products/servers/platforms).
("PCI duplex SCSI cabling" on page
Cabling 68