Pci Hot Plug Expansion Board - HP DL380 Generation 4 Maintenance And Service Manual

Remove the non-functioning fan.
4.
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating
the server in this manner results in improper airflow and improper cooling that can lead to thermal damage.
IMPORTANT: For optimum cooling, install fans in all primary fan locations. For more information, refer to
the fan locations table
To replace the component, reverse the removal procedure.

PCI Hot Plug expansion board

NOTE: Hot-plug functionality is supported only under Microsoft® Windows® 2000 and Windows® 2003. Hot-
plug drivers are not required.
To remove the component:
CAUTION: If the operating system installed on the server does not support PCI Hot Plug functionality,
power down the server before removing expansion boards.
Extend or remove the server from the rack
1.
the server from the
Remove the access panel
2.
("Identifying hot-plug fans" on page 90).
rack" on page 20).
("Access panel" on page 22).
("Extend the server from the
Removal and replacement procedures 50
rack" on page 19, "Remove