Remove the PCI slot release lever.
7.
To replace the component, reverse the removal procedure.
PCI lightpipe and cover
NOTE: This component is available only with the optional, hot-plug PCI riser cage.
To remove the component:
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
Remove the PCI lightpipe cover.
4.
("Extend the server from the
rack" on page 20).
("Access
panel" on page 22).
rack" on page 19,
Removal and replacement procedures 35
"Remove