Diskette drive option
To remove the component:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
Remove the diskette drive.
4.
To replace the component, reverse the removal procedure.
Front bezel
To remove the component:
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
("Extend the server from the
rack" on page 20).
("Access
panel" on page 22).
("Extend the server from the
rack" on page 20).
rack" on page 19,
rack" on page 19,
Removal and replacement procedures 24
"Remove
"Remove