Expansion Slot Cover - HP DL380 Generation 4 Maintenance And Service Manual

Unlock the PCI retaining clip.
6.
Remove the expansion board.
7.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots
have either an expansion slot cover or an expansion board installed.
To replace the component, reverse the removal procedure.

Expansion slot cover

To remove the component:
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser cage.
Remove the PCI riser cage.
4.
("Extend the server from the
rack" on page 20).
("Access panel" on page 22).
rack" on page 19,
Removal and replacement procedures 32
"Remove