Intermec EasyCoder 501 E Installation & Operation Manual page 38

Peel-Off, cont.
3
2.
Pull out the green clip (1) on the liner takeup
hub and dispose of all wound-up liner (2).
5
Remove any empty core from the media
supply hub.
Intermec EasyCoder 501 E – Installation & Operation Ed. 1
4
1.
Turn the label slack absorber clockwise so it
6a
Fit a new roll of labels on the supply hub and
snap-locks in open position.
push the roll inwards as far as it will go.
Chapter 5 Media Load
37