Modem Setup; Figure 3-29 Modem Setup Screen - Honeywell HRXD9 User Manual

Configuration

Modem Setup

1.
2.
3.
4.
5.
6.
56
Note If the DVR is configured for DHCP or an ADSL network, the
DVR's IP address might change whenever the unit is turned on.
Highlight the Modem tab, and the Modem screen
Figure 3-29
Note If the RS232 port is in use for remote control, networking cannot
be configured for a modem.
Highlight Enable and press
able to change the settings if Modem is enabled.
Highlight the box beside Baud Rate and press
from 300 to 115,200 appears.
Highlight the box beside Data Bit and press
formats.
Highlight the box beside Stop Bit and press
Bits.
Highlight the box beside Parity and press
select from None, Odd or Even parity.
Modem Setup Screen
to toggle between On and Off. You will only be
(Figure 3-29) displays.
. A list of baud rates ranging
. Choose between 7 bit and 8 bit
. Choose between 1 and 2 Stop
. A drop-down list appears. You can