Table 1.2 Hardware Specifications (Primequest 1800E) - Fujitsu PRIMEQUEST 1000 Series General Description Manual

PRIMEQUEST 1000 Series General Description
CHAPTER 1 Product Overview
Model
Maximum power
consumption during operation
Dual power feed
Weight [kg (lb)] (*4)
Reserved SB
Flexible I/O
Redundancy
Hot replacement supported
*1 RAID 0, RAID 1, RAID 1E, RAID 5, RAID 6, and RAID 10 are supported.
*2 The external dimensions do not include protrusions.
*3 This value is for an input voltage of 200 V.
*4 The values are for the device with all options installed. However, the values do not include the weight
of mounted rack-mount rails and cables.
For details on the weights of different device configurations, see 1.3 Installation Specifications in
the PRIMEQUEST 1000 Series Hardware Installation Manual (C122-H004EN).
*5 It uses software mirroring or an installed array controller card.
*6 It uses redundancy software.
*7 An operating system that supports PCI Hot Plug is required.

TABLE 1.2 Hardware specifications (PRIMEQUEST 1800E)

Model
CPU
CPU number
Maximum number of CPU
sockets
Number of cores/CPU
Maximum SMP (sockets/cores)
CPU clock
QPI rate
L1/L2 cache
L3 cache
Only possible with 200 VAC
PSU, FAN, HDD (*5), PCI Express card (*6) MMB, and power input system
PSU, FAN, HDD (*5), MMB, PCI Express card (*7)
Intel(R) Xeon processor (7500 series)
6.4 GT/s (E7540, X7560)
L1: 48 KB/core (ECC); L2: 256 KB/core (ECC)
18 MB/CPU [ECC] (E7540)
24 MB/CPU [ECC] (X7560)
9
1800E2
4.00 kW (*3)
150 (330)
Supported
Supported
1800E
E7540 or X7560
8
6 (E7540)
8 (X7560)
8 / 48 (E7540)
8 / 64 (X7560)
2.00 GHz (E7540)
2.26 GHz (X7560)
C122-B022-11EN