PRIMEQUEST 1000 Series General Description
CHAPTER 5 Partitioning
5.4
Partition Configuration Definition Method
The partition configuration is defined using the MMB Web-UI.
To do so, first create a partition. Then, click [Partition] - [Partition Configuration] on the Web-UI. In the [Partition
Configuration] window, register the SB, IOB, GSPB, and Home SB belonging to the partition, by using specific
partition identifiers (PartitionName). Then, set the Mirror Mode and Reserved SB as needed.
FIGURE 5.4 [Partition Configuration] window
For details on the setup procedure, see the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
Remarks
The changes in the partition configuration are applied to each partition when power cycled. They are not applied
when the partition is rebooted. Be sure to stop the partition once and then start it.
122
C122-B022-11EN