Usb Flash Module (Ufm) - Fujitsu PRIMERGY TX200 S6 Options Manual

Ê Reinstall system fan 2 (or 2&4) as described in the
fan 2 (or 2&4)" on page
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
I
You can find information on configuring the TPM in the "D2799 BIOS
Setup Utility for TX200 S6" manual.
9.2

USB Flash Module (UFM)

The server can be equipped with a USB Flash Module (UFM).
Figure 68: UFM installation kit
1 USB Flash Module (UFM)
2 UFM nylon screw
Ê Open the server as described in the
TX200 S6
108.
107.
3 UFM spacer
chapter "Preparation" on page
Options Guide
Further options
section "Installing system
27.
89