System board and components
15.2.1.3 Concluding steps
Ê Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
Ê Install the air guide on CPU 2 as described in section
guides" on page
"Reassembling" on page 54
Ê
"Connecting the server to the mains" on page 60
Ê
"Switching on the server" on page 61
Ê
"Verifying system information backup / restore" on page 81
Ê
"Verifying the system time settings" on page 91
Ê
15.3
USB Flash Module (UFM)
15.3.1 Installing the UFM
Field Replaceable Unit
(FRU)
Tools: tool-less
15.3.1.1 Preliminary steps
"Disabling SVOM boot watchdog functionality" on page 72
Ê
"Suspending BitLocker functionality" on page 71
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
Ê If applicable, remove the riser module 3 as described in section
a riser module" on page
300
69.
62.
Upgrade and Maintenance Manual
"Installing the CPU air
Hardware: 5 minutes
Software: 5 minutes
"Removing
RX2530 M1