Fujitsu PRIMERGY TX200 S6 Options Manual page 57

Figure 26: Routing the accessible drive - DVD example
Ê Connect the data cable (1) to the accessible drive (see the cabling plans in
the Appendix).
I
The DVD SATA cable (T26139-Y3928-V205) is already pre-mounted
and connected to the SATA5 connector of the system board.
Ê Connect the power cable (2) to the accessible drive (see the cabling plans
in the Appendix).
Ê If necessary, connect the data cable to the system board or to a RAID
controller (see the cabling plans in the Appendix).
Ê Attach the front cover or rack front cover as described in the
"Attaching the front cover" on page 109
front cover" on page
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
TX200 S6
111.
107.
Options Guide
Accessible drives and LSD/LSP
or in the section "Attaching the rack
section
57