Fujitsu PRIMERGY TX200 S6 Options Manual page 88

Further options
Figure 66: Inserting the TPM spacer on the system board
Ê Insert the TPM spacer into the hole on the system board.
Figure 67: Fastening the TPM
Ê Insert the TPM on the system board (1).
Ê Fasten the TPM with the special screw for the TPM (2).
Please use the TPM screwdriver insert bit to tighten the special screw.
I
Do not fasten the screw too tightly (torque value of 0.6 Nm).
88 Options Guide
TX200 S6