Rack Model; Opening The Server - Fujitsu PRIMERGY TX200 S6 Options Manual

Preparation
4.2

Rack model

Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the On/Off
button.
Ê Pull all power cords out of the power outlet.
4.2.1

Opening the server

Pulling the server out of the rack and opening the server
Figure 4: Pulling the server out of the rack
Ê Loosen the two knurled screws (1) and pull the server as far as possible out
of the rack (2).
Ê Pull the locking lever as far as it will go (see also
pushes the top cover backward.
V
CAUTION!
Do not use the pulled-out server as a surface on which to put things or
as a work surface, and strictly avoid leaning on or against it.
Ê Remove the top cover.
30 Options Guide
figure 2 on page 28). This
TX200 S6