Fujitsu PRIMERGY TX200 S6 Options Manual page 85

Ê Install a second RAID controller as described in the
expansion cards" on page
Ê Route the second BBU cable in the cable clamps.
Ê Connect the second BBU cable to the second controller.
V
CAUTION!
The connector side with the three dots points towards you.
Ê Reinstall system fan 2 (or 2&4) as described in the
fan 2 (or 2&4)" on page
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
TX200 S6
73.
108.
107.
Options Guide
Expansion cards and BBU
section "Installing
section "Installing system
85