Second Serial Connector - Fujitsu PRIMERGY TX200 S6 Options Manual

9.3

Second serial connector

Ê Open the server and remove system fan 2 (or 2&4) as described in the
chapter "Preparation" on page
Figure 71: Second serial connector installation kit
1 Long slot cover
Figure 72: Replacing the slot cover
Ê Remove the two screws on the short slot cover.
Ê Insert the serial connector in the long slot cover.
Ê Fasten the long slot cover with the two screws.
TX200 S6
27.
2 Second serial connector with short slot
cover
Options Guide
Further options
91