Rotary 1; Rotary 2 - Roland Integra-7 Parameter Manual

Parameter Value
Shuffle # 0–127
Level 0–127

19: Rotary 1

This simulates a classic rotary speaker of the past .
Since the operation of the high-frequency and low-frequency rotors
can be specified independently, the distinctive modulation can be
reproduced realistically . This is most effective on organ patches .
L in
Rotary
R in
Parameter Value
Speed #
SLOW, FAST
Woofer Slow
0 .05–10 .00 Hz
Speed
Woofer Fast
0 .05–10 .00 Hz
Speed
Woofer
0–15
Acceleration
Woofer Level 0–127
Tweeter Slow
0 .05–10 .00 Hz
Speed
Tweeter Fast
0 .05–10 .00 Hz
Speed
Tweeter
0–15
Acceleration
Tweeter Level 0–127
Separation 0–127
Level # 0–127
Explanation
Timing of volume changes in levels
for even-numbered steps (step 2,
step 4, step 6 . . .) .
The higher the value, the later the
beat progresses .
Output level
L out
R out
Explanation
Simultaneously switch the rotational
speed of the low frequency rotor
and high frequency rotor .
SLOW: Slows down the rotation to
the Slow Rate .
FAST: Speeds up the rotation to the
Fast Rate .
Slow speed (SLOW) of the low
frequency rotor
Fast speed (FAST) of the low
frequency rotor
Adjusts the time it takes the low
frequency rotor to reach the newly
selected speed when switching from
fast to slow (or slow to fast) speed .
Lower values will require longer
times .
Volume of the low frequency rotor
Settings of the high frequency rotor
The parameters are the same as for
the low frequency rotor
Spatial dispersion of the sound
Output Level

20: Rotary 2

This type provides modified response for the rotary speaker, with the
low end boosted further .
This effect features the same specifications as the VK-7's built-in
rotary speaker .
L in
Rotary
R in
Parameter Value
Speed # SLOW, FAST
Brake # OFF, ON
Woofer Slow
0 .05–10 .00 Hz
Speed
Woofer Fast
0 .05–10 .00 Hz
Speed
Woofer Trans Up 0–127
Woofer Trans
0 –127
Down
Woofer Level 0 –127
Tweeter Slow
0 .05–10 .00 Hz
Speed
Tweeter Fast
0 .05–10 .00 Hz
Speed
Tweeter Trans Up 0 –127
Tweeter Trans
0 –127
Down
Tweeter Level
0 –127
Spread 0 –10
Low Gain -15–+15 dB
High Gain -15–+15 dB
Level # 0 –127
MFX Parameters
2-Band EQ
L out
R out
2-Band EQ
Explanation
Rotational speed of the rotating
speaker
Switches the rotation of the rotary
speaker .
When this is turned on, the rotation
will gradually stop .
When it is turned off, the rotation
will gradually resume .
Low-speed rotation speed of the
woofer
High-speed rotation speed of the
woofer
Adjusts the rate at which the
woofer rotation speeds up when
the rotation is switched from Slow
to Fast .
Adjusts the rate at which the
woofer rotation speeds up when
the rotation is switched from Fast
to Slow .
Volume of the woofer
Settings of the tweeter
The parameters are the same as for
the woofer .
Sets the rotary speaker stereo image .
The higher the value set, the wider
the sound is spread out .
Gain of the low range
Gain of the high range
Output Level
79