Adjustment options
5.11.2
Adjusting the angle of the
calf pad
See fig. 010512020.
The angle of the calf pad can be adjusted as
follows:
•
Loosen nut (A) a few turns with a spanner
with a key width of 13 mm.
•
Place the calf pad (B) in the desired
position.
•
Tighten the nut again.
XXXXXX-010512020.nl.doc
5.12 Adjusting the height of the push
bracket
See fig. 010517010.
The push bracket can be adjusted in height,
so that the assistant can push the wheelchair
in a position that is as comfortable as
possible.
The push bracket can be adjusted in height
as follows:
•
Loosen both winged screws (A).
•
Slide the push bracket up or down to the
desired height.
•
Tighten both winged nuts tightly, so that
the push bracket cannot slip.
Attention:
The cable for the tilt-adjustment may not become too taut.
SADKIB-010517010-en.doc
44
A
B
010512020
A
010507010