Adjusting The Depth Of The Footplate; Adjusting The Armrest - Handicare Ibis 24 User Manual

•
Lock the Allen bolt with the locking nut.
5.6.2 Adjusting the depth of the
footplate
See fig. 010506020.
The depth of the footplate can be adjusted in
two different positions.
For this the left and right footplate should be
exchanged.
The exchanging of the footplates should be
done as follows.
•
Remove the calf strap.
See 'Removing calf strap'.
•
Loosen the set bolt (A) a few turns with an
Allen key with a key width of 4 mm.
•
Let the foot-rest (B) lower together with the profile (C) from the top tube (D).
•
Exchange both footplates for each other and slide them into the top tubes.
•
Adjust the footplates to the desired height.
•
Tighten the setscrews.
•
If necessary, readjust the angle of the footplate. See 'Adjusting the angle of the
footplate'.
XXXXXX-010506020.nl.doc
5.7

Adjusting the armrest

See fig. 010508000.
The arm-rests provide support to the arms to
limit the burden on the shoulders. For this
purpose the arm-rests can be adjusted in
terms of height (A) and depth (B).
The arm-rests can also be removed (C), to
make space to leave the wheelchair
sideways, for example if you make a transfer
from a car seat.
By removing the arm-rests the wheelchair can
be made smaller, which simplifies transport.
SADKIB-010508000.nl.doc
Adjustment options
C
A
D
A
C
B
010506020
B
010508000
39