4.7.3
Removing the arm-rest
See fig. 010407030.
The arm-rests should be removed as follows:
•
Loosen the cap (A) one turn.
•
Remove the arm-rest (B) together with the
side panel.
The arm-rests should be replaced in reverse
order, to return them to their original position.
•
Slide the arm-rests into their holders.
•
Tighten both caps again.
SADKIB-010407030.nl.doc
4.7.4
Removing the headrest
(option)
See fig. 010407070.
•
The height adjustment can be done as
follows:
•
Loosen the cap (A) a number of turns.
•
Slide the headrest (B) off in upward
direction.
Tighten the cap again, so that it will not get
lost.
XXXXXX-010407070.nl.doc
4.7.5
Removing the back wheels
(24'')
See fig. 010407110.
The back wheels of the Ibis 24" have been
mounted, complete with bearing system,
using a quick-release system in the axle
housing of the frame.
The back wheels (A) should be removed as
follows:
•
Press button (B) in the center of the wheel
hub (C) and keep it depressed.
•
Remove the whole back wheel (A) by
taking it outward.
B
A
B
A
E A
C
D
Operation
010407030
010407070
B
010407110
27