Position Of Seat Cushion; Adjusting The Seat Width - Handicare Ibis 24 User Manual

Adjustment options
Tighten the locking bolts on both sides securely.
XXXXXX-010502020.nl.doc
5.2.2

Position of seat cushion

See fig. 010502050.
The seat cushion can be fastened to the
frame in three positions. This allows the seat
depth to be reduced.
The location of the seat cushion can be
changed as follows:
•
Remove the seat from the chair by pulling
it up.
•
Loosen the two clamps (B) with a Phillips
screwdriver PH2.
•
Place the clamps at one of the other
places (A).
•
Place the seat on the chair by clicking the
clamps on the front round tube of the seat frame.
Check whether the seat is clicked in place securely.
XXXXXX-010502050.nl.doc
5.2.3

Adjusting the seat width

See fig. 010502030.
The space between the two arm-rests can be
adjusted as desired between
36 cm and 52 cm (15" and 20").
The holder for the arm-rests can be shifted in
width on both sides
Do the adjustment, or have it done by
someone, and then take your seat in the
chair.
The seat width adjustment should be done as
follows:
•
Loosen the two Allen bolts (A) on both sides of the chair frame with an Allen key with
a key width of 4 mm.
•
Slide the arm-rests to the desired width.
32
A
A
B
010502050
010502030