Adjustment options
5.9.1
Adjusting the height of the
headrest
See fig. 010510010.
The height adjustment can be done as
follows:
•
Loosen the wing nut (A) a few turns.
•
Slide the headrest (B) to the desired
height.
•
Securely tighten the wing nut again so that
the headrest cannot shift.
XXXXXX-010510010.nl.doc
5.9.2
Adjusting the depth of the
headrest
See fig. 010510020.
The depth adjustment should be done as
follows:
•
Loosen the two bolts (A) a bit with a
spanner with a key width of 10 mm.
•
Set the desired headrest depth (B).
•
Tighten the two bolts securely again.
XXXXXX-010510020.nl.doc
5.9.3
Adjusting the angle of the
headrest
See fig. 010510030.
The adjustment of the angle should be done
as follows:
•
Loosen the bolt (A) a bit with a spanner
with a key width of 10 mm.
•
Set the desired angle (B).
•
Tighten the bolt securely again.
XXXXXX-010510030.nl.doc
42
B
A
010510010
B
A
010510020
B
A
010510030