Reduced - Handicare Ibis 24 User Manual

Operation
The back wheel should be mounted as follows:
•
Press button (B) in the center of the wheel hub (C) and keep it depressed.
•
Slide pin (D) of the back wheel (A) into the axle housing (E) of the frame, as far as it
goes.
•
Release the button (B).
The back wheel is now secured automatically.
Always check the proper locking of the back wheels.
Try to pull the wheel out of the frame in axial direction. If the wheel
comes out, it is not properly secured. In that case, you should
repeat the above actions.
SADKIB-010407110.nl.doc
4.7.6

Reduced

See fig. 010407080.
After all of the aforementioned parts have
been removed from the wheelchair, all that
remains is fig. 010407080.
This is the largest part after the reducing
operation:
A Ibis 12"
B Ibis 24"
SADKIB-010407080.nl.doc
28
A
B
010407080