Checking The Time Server Status - Avaya 9600 Series User Manual

20.3 Checking the Time Server Status

For systems where the system automatically obtains the time from a time server, this option is available in place of the
Date , Time and Time Offset
126 128
information the system has obtained from the time server.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down
6. The time server information is listed. It includes the address of the time server, the current local time and the UTC
time. If the phone system is configured for daylight savings then the current amount of daylight savings being
applied to the local time is also shown.
9600 Series Phone User Guide
IP Office Release 6.1
functions. It allows you to check the current status of the time server and the
128
arrow keys to highlight Phone User. Press Select.
arrow keys to highlight System Administration. Press Select. If the option is not
arrow keys to highlight Time Server Status. Press Select.
System Administration: Setting the Date
PHONE key and then press the
Issue 02c (28 October 2010)
Page 127