Creating A Pattern (Note Input) - Roland JD-08 Owner's Manual

Creating a Pattern (Note Input)

Input some notes (from the scale on the keys) into the sequencer to create a pattern.
1. Select the pattern to record (
2. Hold down the [COMMON] button and press the [EFFECTS] button to make the indicators light.
The unit enters sequencer mode (STEP SEQ). The current tempo is shown on the display.
3. To select the step to record, hold down the desired [1]–[16] button and press the [NOTE] button.
4. Press the [1]–[13] buttons to input the notes.
Inputting notes using the K-25m (sold separately)
You can use the K-25m (sold separately) to directly input notes (from the scale on the keys) into the steps to record.
1. Select the pattern to record (
2. Hold down the [COMMON] button and press the [EFFECTS] button.
The unit enters sequencer mode (STEP SEQ). The current tempo is shown on the display.
3. Input the notes using the keyboard while holding down the [1]–[16] buttons corresponding to the steps
to record.
For installation/removal/angle adjustment, refer to the K-25m's Owner's Manual.
(p. 23)).
Selecting a Pattern
(p. 23)).
Selecting a Pattern
Using the Sequencer
27