Installing The Software - Roland EGX-300 User Manual

Part 1

1-4 Installing the Software

The included CD-ROM contains several pieces of software for operating the EGX-300.
Operating environment
MODELA Applications
Computer Personal computer running Windows 95, Windows 98, Windows Me, Windows NT 4.0, or Windows 2000
CPU Recommended CPU for your Windows operating system
System Memory Recommended memory for your Windows operating system
Hard Disk
Setting Up the Program
* If you are installing under Windows NT 4.0 or Windows 2000, you need full access permissions for the printer settings.
Log on to Windows as a member of the "Administrators" or "Power Users" group.
For more information about groups, refer to the documentation for Windows.
1
Switch on the computer and start Windows.
3
When the screen shown below appears, click the
Click [Install].
To view the description of a program, click the
(There are manuals in PDF format for the programs that the
files.)
16
Dr. Engrave
7 MB or more 10 MB or more
of free space of free space
in [Click here], then choose [EGX-300].
button. To view the manual, click the
If there are programs you don't want to install, then
clear their check boxes before you click [Install].
3D Engrave
10 MB or more
of free space
2
Place the CD from the Roland Software Package in
the CD-ROM drive.
The Setup menu appears automatically.
button.
button references. Acrobat Reader is required to view PDF
Virtual MODELA
5 MB or more
of free space