Roland EGX-300 User Manual page 17

Connections
Ground the unit with the ground
wire.
Failure to do so may result in risk of
electrical shock in the even of a mechanical
problem
Use only with the power cord
included with this product.
Use with other than the inculuded power
cord may lead to fire or electrocution.
NOTICE
Be sure that the power to both the computer and the main unit is switched off when connecting the cable.
Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation. Doing so may lead to faulty operation or breakdown.
The cable for computer connection is optional. Please purchase the appropriate cable for the type of computer and software used.
Use either a parallel
cable or serial cable
to connect.
RS-232C connector
on the computer
Crossover serial (RS-232C)
cable
(sold separately)
Parallel (Centronics)
cable
(sold separately)
Screw
Lock-use pin
Printer connector
on the computer
Do not use with any electrical power
supply that does not meet the
ratings displayed on the unit.
Use with any other power supply may lead
to fire or electrocution.
Left side
Screw
Power switch
Power cord
Part 1
Right side
15