Installation And Connections - Roland EGX-300 User Manual

Part 1

1-3 Installation and Connections

Install on a stable surface.
Failure to do so
may result in falling
of the unit, leading
to injury.
Doing so may lead
to faulty operation
or breakdown.
NOTICE
Use within a temperature range of 5 to 40 C (41 to 104 F) and within a humidity range of 35 to 80%.
To prevent accidents, do not install in any of the following types of areas.
• Avoid use in areas subject to strong electric noise.
• Avoid use in areas subject to high humidity or dust.
• The EGX-300 generates heat when used, and should not be installed in an area with poor heat radiation
characteristics.
• Do not install in an area subject to strong
The space shown in the figure below is required for installation.
If you want to use the unit with a vacuum cleaner attached, see "1-8 Vacuum Cleaner Connection" and ensure that you have the required
amount of free space.
14
Installation
685 mm
(27 in.)
598 mm
(23-9/16 in.)
Unpacking, installation, and moving
must be carried out by two or more
persons.
Failure to do so may result in falling of the
unit, leading to injury. (The machine weighs
28.5 kg (62.8lb.). )
545 mm
(21-1/2 in.)