2-4 Installing and Setting Up the Software
Installing the Software ( Dr. Engrave )
Procedure
Display the setup menu of the Roland Software Package.
Remove the CD-ROM from the CD-ROM drive.
24
Chapter 2 Installation and Setup
Install Menu
Click [Install] of "Dr. Engrave".
Windows 2000/XP
The setup program starts. Follow the mes-
sages to carry out setup and finish setting
up the program.
Windows Vista
The [User Account Control] appears, click
[Allow].
The setup program starts. Follow the mes-
sages to carry out setup and finish setting
up the program.
When installation finishes, the screen
shown at left appears. Click [Close]
or [OK].
When all installation finishes, click
.