Installing The Software - Roland EGX-30 User Manual

Installing the Software

The included CD-ROM contains several pieces of software for operating the EGX-30.
System Requirements
<Dr.Engrave>
® ®
- Microsoft Windows 95, Windows 98, Windows Me, Windows NT
- The minimum required CPU for the operating system (Pentium
- The minimum amount of required RAM for the operating system (32 Mbytes or more recommended)
- 10 Mbytes or more of free hard disk space for installation
Setting Up the Program
* When setting up the software under Windows XP, Windows 2000 and Windows NT 4.0, log on as the member of a group [Adminis-
trators] or [Power Users].
For more information about groups, refer to the documentation for Windows.
1
Switch on the computer and start Windows.
3
When the screen shown below appears, click the
Click [Install].
To view the description of a program, click the
(There are manuals in PDF format for the programs that the
files.)
12
®
4.0, Windows 2000, or Windows XP operating system
®
or higher recommended)
2
Place the CD from the Roland Software Package in
the CD-ROM drive.
The Setup menu appears automatically.
in [Click here], then choose [EGX-30].
button. To view the manual, click the
button references. Acrobat Reader is required to view PDF
If there are programs you don't want to install, then
clear their check boxes before you click [Install].
button.