Finishing - Roland EGX-300 User Manual

1-13 Finishing

Do not carelessly insert the hands
while in operation.
Doing so may result in injury (during manual
operation.).
Use a commercially available brush
to remove metal cuttings.
Attempting to use a
vacuum cleaner to take
up metal cuttings may
cause fire in thevacuum
cleaner.
After cutting has been finished, detach the cutter, remove the workpiece, and clean away chips.
1
Press the [MENU] key to make the following screen
appear on the display.
Please use a vacuum cleaner to
remove cutting dust.
Do not use any blower like airbrush.
Otherwise, dust spread in the air may harm
your health or damage this machine.
Perform dry cutting with no cutting
oil.
Such materials can
cause fire.
When you're finished,
wash your hands to
rinse away all
cuttings.
2
Press the arrow keys and the [+Z] key to move the
bed to a position where the cutter and material can
easily be detached.
Part 1
33