Software - Honeywell HMAX082 Owner's Operation Manual

7.4.3 Alarm Properties, Continued
3. The alarms can be set up so that they can interrupt already active alarms with equal
priority or so that they cannot interrupt.
4. The alarms can be set so that the RapidDomes are returned to the
position or not returned to the pre-alarm position.
5. The alarm buzzer can be enabled/disabled. If disabled, no audible sound is heard
when an alarm is active.

7.5 SOFTWARE

To access the software menu:
1. Access the main menu by pressing the 9 button,
the 0 button, the 9 button, the 0 button, and then
pressing the lock button.
2. From the main menu, press the 5
button to access the software menu.
This menu cannot be edited and is for
information only. It shows the product
type (cameras/monitors), the software
version and the date that this software
was compiled.
Rev. 1
SOFTWARE/PRODUCT INFORMATION
PRODUCT TYPE
MASTER SOFTWARE
COMPILE DATE
38
pre-alarm
MAIN MENU
1 CAMERAS
2 MONITORS
3 SYSTEM
4 ALARMS
5 SOFTWARE
16/2
V01.00
Mar 16 2004
LOCK TO EXIT
18-July-2005
900.0560