7.1.1 Camera, Preset, and Sector Titles
From the camera menu, press 1 to program
camera titles, preset titles, and sector titles.
a. Camera Titles
1. From the titles menu, press the 1
Rev. 1
button to access the CAMERA titles.
Note: If a title has been
programmed for a camera, the title
is displayed after the camera
number. For example, CAMERA
01:ENTRANCE.
a. Select the camera by pressing the number buttons that correspond to the
camera.
b. Press the aux button to program camera titles or edit existing titles.
c. The letter "A" on the display should be flashing. Use the joystick (up, down,
left, right) to move around on the displayed keyboard. When the desired
character is flashing, press the aux button to select it. Continue selecting
characters (up to 20) until the desired title is displayed.
d. Press lock to end editing.
e. Select another camera or press
lock to exit the camera titles
menu.
1 TITLES
2 SETTINGS
3 TOURS
4 SYNCHRONISATION
5 PRIVACY ZONES
6 SECTOR ZONES
7 REMOTE RESET
1 CAMERA
2 PRESET
3 SECTOR
CAMERA
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9 SPACE
[ ] ( ) + - / : . ! ?
19
CAMERA MENU
SELECT OPTION
LOCK TO EXIT
TITLES MENU
SELECT OPTION
LOCK TO EXIT
CAMERA TITLES
01:
INSERT DELETE CLEAR
AUX TO EDIT
LOCK TO EXIT
18-July-2005
900.0560