Honeywell HMAX082 Owner's Operation Manual page 102

8.4.5 Tours, Continued
3. Click on the tour you want to program for the selected Camera. For example, click
on Tour 1. The window for programming Camera 1, Tour 1 is displayed.
There are several buttons on the bottom of the window and the side of the window to
assist the user in programming and editing the tour
Append – Click on the Append button to add another preset at the end of the tour.
The cursor moves to the end of the programmed listing.
Insert – Using the up and down arrow keys, position the cursor on the line below
where you want to insert a preset and click the Insert button. For example, to insert
a preset between stage 3 and 4, position the cursor on stage 4, and then click the
insert button.
Remove – Position the cursor on the preset you want to delete and click on the
Remove button. All presets below the deleted preset are moved up one stage.
Send – After programming the tour, click on the Send button to transmit the tour
configuration to the MaxCom Gold.
Receive – To transmit the current programming for a tour from a MaxCom Gold to
the PC configuration utility, click on the receive button.
Reload – To return the screen to the default configuration or to the configuration
prior to any changes made in this editing session, press the Reload button.
Save – To save the configuration on your PC, click on the Save button.
Rev. 1 90 900.0560
18-July-2005